Q: My system equips with 1.1 USB port, can I use it with USB flash disk 2.0?
A: Yes, USB 2.0 device has backward compatibility, only it will run in a reduce speed if you use it with 1.1 USB port. A:
This device is driver free under Mac OS 9.0 or above. It should be plug and
play.
If the USB mass storage driver of Mac system was modified or deleted, it might not see the USB drive when plug it in. Please first remove all USB devices from the system. Visit Apple's website for downloading the USB driver then reinstall it. Also please plug it directly to the USB port of Motherboard instead the port on the keyboard or via a USB hub or extension cable.
If the USB mass storage driver of Mac system was modified or deleted, it might not see the USB drive when plug it in. Please first remove all USB devices from the system. Visit Apple's website for downloading the USB driver then reinstall it. Also please plug it directly to the USB port of Motherboard instead the port on the keyboard or via a USB hub or extension cable.
A:
1. Check the USB port is enabled and powered.
2. Plug the USB drive then go to device manager (Right click the "My computer icon, properties, hardware, device manager")
3. Click "+" next to the "Universal serial bus controllers??or "other device" to see if anything that is with yellow question mark or green exclamation mark.
4. Please choose it and update the driver. You may choose "windows update" or from the "CD-ROM".
This device should show as a "USB mass storage device" in "USB Controllers". And if this computer is in the office, please check your user permission in the system.
2. Plug the USB drive then go to device manager (Right click the "My computer icon, properties, hardware, device manager")
3. Click "+" next to the "Universal serial bus controllers??or "other device" to see if anything that is with yellow question mark or green exclamation mark.
4. Please choose it and update the driver. You may choose "windows update" or from the "CD-ROM".
This device should show as a "USB mass storage device" in "USB Controllers". And if this computer is in the office, please check your user permission in the system.
A:
Go to Start-Setting-control panel-admin tools-computer management-Disk
management. Right click the disk of the Traveling disk, choose change drive letter and
path. Give the drive a letter that is not being used.
A:
It's because for hardware manufacturer 1k=1000bytes. But for Microsoft
1k=1024bytes.That's why a USB drive 512MB shows only 499MB under Windows OS.
A:
The OS should not ask another driver for security area or detect it as
security device. Please test it under other system to verify its function, if the problem
persist, this device might be defective by some wrong setting. The problem can not be
solved by user's system. Please contact the original purchase place for the retail
warranty service.
A:
The USB drive series are compatible with Microsoft Windows Vista system, but
specific USB drives are for ReadyBoost technology; you may please refer to product
specification for further information.
Windows ReadyBoost can use storage space on some removable media devices, such as USB flash drives, to speed up your computer. The recommended amount of memory to use for ReadyBoost acceleration is one to three times the amount of random access memory (RAM) installed in your computer. For instance, if your computer has 512MB of RAM and you plug in a 4GB USB flash drive, setting aside from 512 MB to 1.5 GB of that drive will offer the best performance boost. Higher than that will not be much benefit.Due to FAT32 file system limits ReadyBoost; 4GB of flash disk is maximum capacity for ReadyBoost function.
Windows ReadyBoost can use storage space on some removable media devices, such as USB flash drives, to speed up your computer. The recommended amount of memory to use for ReadyBoost acceleration is one to three times the amount of random access memory (RAM) installed in your computer. For instance, if your computer has 512MB of RAM and you plug in a 4GB USB flash drive, setting aside from 512 MB to 1.5 GB of that drive will offer the best performance boost. Higher than that will not be much benefit.Due to FAT32 file system limits ReadyBoost; 4GB of flash disk is maximum capacity for ReadyBoost function.
A:
Please download disk recovery utiity to re-format the drive.
Note: Low-level format will erase entire data from the drive including preloaded software license such as USB Notebook. Use this tool only when there is problem with USB flash drive.
Note: Low-level format will erase entire data from the drive including preloaded software license such as USB Notebook. Use this tool only when there is problem with USB flash drive.
A:
Please download disk recovery utiity to re-format the drive.
Note: Low-level format will erase entire data from the drive including preloaded software license such as USB Notebook. Use this tool only when there is problem with USB flash drive.
Note: Low-level format will erase entire data from the drive including preloaded software license such as USB Notebook. Use this tool only when there is problem with USB flash drive.
A:
Please follow these steps to remove and reinstall all USB controllers:
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click System, and then click the Hardware tab.
3. Click the Device Manager Button.
4. Expand Universal Serial Bus controllers.
5. Right-click every device under the Universal Serial Bus controllers’ node and then click uninstall to remove them one at a time.
6. Reboot the system without any USB device attached to the USB port.
7. Windows system will reinstall the USB controllers when restarted the computer.
8. Plug in the disk and test to this issue is resolved.
1. Click Start, point to Settings, and then click Control Panel.
2. Double-click System, and then click the Hardware tab.
3. Click the Device Manager Button.
4. Expand Universal Serial Bus controllers.
5. Right-click every device under the Universal Serial Bus controllers’ node and then click uninstall to remove them one at a time.
6. Reboot the system without any USB device attached to the USB port.
7. Windows system will reinstall the USB controllers when restarted the computer.
8. Plug in the disk and test to this issue is resolved.
A:
Please follow the steps to rectify the problem.
Right click the removable disk’s icon to choose "properties"—"tools".
Run the function of “Error-checking status” and "Defragmentation Status"
Then formats the disk by the disk utility program that came with it.
If the function could not work or the problem still persists, please take it to the original purchase place for the retail warranty service.
The common reason to damage a USB is to unplug it from USB port unexpectedly.
Under Windows XP/2000/ME, please follow the safe removal procedure before you unplug the disk. Please left click on the green arrow in the icon tray, and then click on the message "Stop USB Mass Storage Device." After the "you can remove this Device as normal." Message shows, click ok they you can unplug the USB disk from the USB port.
If the device was removed without following the safe removal procedure, it might be damaged or lost data.
Right click the removable disk’s icon to choose "properties"—"tools".
Run the function of “Error-checking status” and "Defragmentation Status"
Then formats the disk by the disk utility program that came with it.
If the function could not work or the problem still persists, please take it to the original purchase place for the retail warranty service.
The common reason to damage a USB is to unplug it from USB port unexpectedly.
Under Windows XP/2000/ME, please follow the safe removal procedure before you unplug the disk. Please left click on the green arrow in the icon tray, and then click on the message "Stop USB Mass Storage Device." After the "you can remove this Device as normal." Message shows, click ok they you can unplug the USB disk from the USB port.
If the device was removed without following the safe removal procedure, it might be damaged or lost data.
A:
Please check the file system you choose to format the disk.
Mac OS is fully compatible with FAT file system but not FAT32 or NTFS.
Please reformat it by FAT under Windows OS.
If you format the disk as a HDD or USB ZIP by the utility program under Windows OS, it can't be recognized by Mac OS, either. Please reformat it as FDD by the utility program under Windows OS
Mac OS is fully compatible with FAT file system but not FAT32 or NTFS.
Please reformat it by FAT under Windows OS.
If you format the disk as a HDD or USB ZIP by the utility program under Windows OS, it can't be recognized by Mac OS, either. Please reformat it as FDD by the utility program under Windows OS
A:
This might be the issue of the FAT file system.
Every USB drive is formatted in FAT file system.
If you want to copy more then 255 files at a time, please first format it into FAT 32.
Right click the removable disk icon to choose "format" then choose to format the disk in FAT32. Then you could copy large amount files to the disk without problem
Every USB drive is formatted in FAT file system.
If you want to copy more then 255 files at a time, please first format it into FAT 32.
Right click the removable disk icon to choose "format" then choose to format the disk in FAT32. Then you could copy large amount files to the disk without problem
A:
The OS should not ask another driver for security area or detect it as
security device.
Please test it under other system to verify its function, if the problem persist, this device might be defective by some wrong setting. The problem can not be solved by user's system.
Please contact the original purchase place for the retail warranty service
Please test it under other system to verify its function, if the problem persist, this device might be defective by some wrong setting. The problem can not be solved by user's system.
Please contact the original purchase place for the retail warranty service
A:
This device doesn't support WIN NT/95/CE/Mac OS 8.6.
Please use it under WIN 98/98SE/2000/ME/XP and MAC 9.0& above.
Please use it under WIN 98/98SE/2000/ME/XP and MAC 9.0& above.
A:
The disk utility program only works under Windows OS, so does the function of
utility program. If you set a security partition by disk utility program under Windows OS,
it will be unrecognizable by Mac OS.
A:
This problem is resulted from the interruption of firewall software after you
applied windows XP service pack 2. Remove the software completely from your system then
download and install the new released one to rectify the problem. Please don't install the
new version over the old one.
A:
It depends on the capacity of your disk also the size of files you store.
USB drives are currently available with up to 2 GB storage capacity, and are available in a variety of storage sizes for different needs.
USB drives are currently available with up to 2 GB storage capacity, and are available in a variety of storage sizes for different needs.
A:
Causing
1) is the application only support logged in to the computer with Administrator rights for running.
2) Make sure the application is suitable for your USB Flash Drive.
1) is the application only support logged in to the computer with Administrator rights for running.
2) Make sure the application is suitable for your USB Flash Drive.
